Aircraft door seal
Aircraft doors have kinematics specific to each aircraft. Requirements for these seals are particularly demanding because of their proximity to passengers and cabin crew. Other door types include overwing emergency exit doors and cargo doors. Compression loads, pressure resistance and acoustic performance are among the criteria that must be considered when designing these seals. They […]
Belly fairing seal and membrane
The belly fairing is the central aircraft fairing surrounding the wing-to-fuselage junction and the central wing box. It is a fixed structural fairing. Sealing in this area contributes to aircraft stability and aerodynamic performance. The belly fairing must be sealed at its interfaces with both the fuselage and the wings. Because structural deformation can be […]
Engine pylon seal
The engine pylon connects the engines to the wings. The pylon is faired to minimize aerodynamic disturbance. As it is mounted directly beneath the wing, it contributes to wing aerodynamics. Engine pylons must also provide sealing at the nacelle interfaces. This area is subjected to major mechanical loads generated by engine thrust, resulting in significant […]
Slat seal
The slat is a moving surface located on the wing leading edge. It increases lift by delaying airflow separation at high angles of attack during low-speed landing phases. Wing sealing is important to aircraft stability and performance, including fuel efficiency. Slats must also provide sealing at their interfaces with the fixed wing structure. Slat seals […]
Engine nacelle seals
The nacelle is the structural element surrounding the engine. Nacelles include several moving components: some operate on every flight, such as thrust reversers, while others provide access for maintenance. Nacelles must notably contain a fire in the event of an engine incident, so their seals must withstand very severe conditions. Nacelle seals must therefore be […]
Spoiler seal
The spoiler is a moving surface located on top of the wing. It acts as an aerodynamic brake in flight or during landing by reducing the lift generated by the wings. Some aircraft can also use spoilers asymmetrically to assist with roll control. Sealicone can work with you from the design stage to define a […]
Fairing seal
Fairings are aerodynamic covers that enclose the mechanisms required for flap deployment and reduce aerodynamic disturbance. Flap-track fairings include a fixed section and a moving section that follows the flap movement. Fairings also protect the mechanisms and help reduce noise by optimizing airflow and limiting turbulence. Although secondary, they also contribute to the aircraft’s external […]
Flap seal
Flaps are moving wing surfaces that deploy to increase lift and reduce stall speed. They allow aircraft to take off and land at lower speeds, contributing to passenger comfort and safety. They also enable operation from shorter runways. Contact us to learn about our latest developments.
Aileron seal
test court
Empennage seal
The empennage provides aircraft stability and controls pitch and yaw. Yaw stability is provided by the vertical stabilizer, or fin. Pitch stability is provided by the horizontal stabilizer. These assemblies include moving surfaces used to control aircraft balance and flight.